Nozzle Torque Wrench: 1.5 Nm By Slice Engineering | Simplifies Nozzle Changes | Hassle-Free Nozzle Swaps | Correctly Seals Nozzle Onto The Hot Block | One-Handed Nozzle Changes with Mosquito Hotends

Annoying nozzle changes getting you down? Use the Nozzle Torque Wrench to wrench away your leaky nozzle woes. The rotary slip mechanism is set to 1.5 Nm, the exact torque you need to get that nice seal when tightening your nozzles, and uses a standard 1/4” drive. Designed to fit the Slice Engineering Vanadium Nozzles without an adapter, as our nozzles have a 6 mm hex (that’s a little under 1/4” for those that don’t speak Metric), with a little wiggle room for that stubborn adhered plastic. The Nozzle Torque Wrench will fit any other nozzles when used in combination with a hex-to-square drive adapter and appropriately sized socket.

• Specifically designed for changing nozzles
• 1.5 Nm torque provides correct seal to prevent leaking plastic
• Perfect tool for one-handed nozzle change when paired with The Mosquito Hotend
• Fits any Slice Engineering nozzles natively, with just enough wiggle room for that baked on plastic
• Includes a steel adapter to convert the 6 mm (1/4") hex to a 7 mm (9/32") hex, broadening the range of compatible nozzles
• Fits other style nozzles with off-the-shelf adapters